December 17, 2008
Rocker panel area under door.
Fitting the trunk lid hinges.
Trunk lid hinges and prop to hold lid open.
Making and fitting the panel beneath the driver's side door.
Forming the rocker panel.
December 17, 2008
Rocker panel area under door.
Fitting the trunk lid hinges.
Trunk lid hinges and prop to hold lid open.
Making and fitting the panel beneath the driver's side door.
Forming the rocker panel.
Sawing a kerf for the new panel.
December 10, 2008
Dis assemly of John's rear axle.
Removing the drive shaft.
More dis assembly.
December 3, 2008
Drilling the holes for the fender brace.
Installing the fender brace.
Cleaning and adjusting a carburator.
November 19, 2008
Grinding the seams.
Checking the fit at the tail.
Fitting the passenger side door.
November 12, 2008
Welding a patch panel
Fitting the bottom patch panel.
Grinding the weld seam.
Quarter panel tacked welded.
Finish welding.
Installing window hardware.
Installing the rear passenger side window.
November 5, 2008
Test fitting the rear quarter panel.
Rear quarter panel fit.
October 30, 2008
Streaching an edge of the rear fender.
October 8, 2008
Fitting the rear quarter panel to the 1924 Coupe.
Working on John's engine.